The plastic agglomerator converts flexible plastic waste into small flakes that are fed into washing machines in the plastic recycling line. It can also agglomerate it into granules that can be used directly.

The agglomerator can process many materials such as LDPE, HDPE, PE, and other flexible materials found in plastic waste such as bags, hoses, and others.

The machine is fed with plastic waste from the top while the blades are rotating. This continues until the required quantity is reached, then the lower door is opened while the blades are still rotating to discharge the agglomerated material and feed new material.

Technical Specifications:

1. Agglomerator manufactured with Egyptian materials and ready-made components of European origin

2. Machine body made from high-quality steel plates, 5 mm thick

3. The chamber is made from stainless steel plates, 3 mm thick

4. Agglomeration tank diameter is 60 cm and height is 90 cm

5. Cutting blades are manufactured from specified steel grades

6. The machine can process PE, LDPE, HDPE, and PVC materials

7. The machine is equipped with an electrical control panel with the necessary protection

8. The machine operates with 4 rotating blades and 4 stationary blades

9. Machine production capacity is 250 kg / hour

10. The machine is driven by a 75 HP electric motor

11. Blade speed is 750 rpm

12. Heating is self-generated by friction

13. The machine is equipped with a side door that opens manually during operation to discharge the agglomerated material

14. The machine is equipped with a top door that opens manually during operation to feed new material

15. The machine is painted with anti-rust primer and a final topcoat

16. Total weight of the machine is approximately 1200 kg

Additional Manufacturing Features:

1. The machine is manufactured with Egyptian materials and ready-made components of European manufacture

2. Metal parts are manufactured on laser machines to ensure dimensional accuracy

3. Parts are assembled with bolted connections without any welding to facilitate maintenance operations

4. Each part in the machine has a serial number and its own engineering drawing kept by us for remanufacturing upon request

5. Spare parts can be ordered later by providing a photo of the damaged part or its number.