Technical Specifications of the Press:

1. Hot press, Egyptian manufacture with ready-made components of European origin

2. The press is used to manufacture tiles from rubber powder resulting from recycling

3. The press can be used to produce full sheets of rubber or wood according to the required material

4. Total press force is 216 tons

5. Total press output is 10 square meters per cycle

6. The press can be operated 6 to 10 times per hour depending on tile thickness

7. The press consists of four levels for placing molds or sheets on them

8. Area of one level is 110 cm long x 260 cm wide

9. Distance between levels during opening is 15 cm

10. The press is equipped with a hydraulic pump operating on a 10 HP electric motor

11. The press operates on 6 hydraulic cylinders, each with a capacity of 30 tons

12. The hydraulic circuit is equipped with an oil level indicator, temperature indicator, and oil filter

13. The press is equipped with an oil-operated heating unit to heat the press platens

14. The heating unit operates via electric heaters with 20 kW capacity and an oil pump

15. The press is equipped with an electrical control panel for operation and adjustment, equipped with the necessary protection units

16. Temperature, operating time, and shutdown can be controlled from the electrical panel

17. The press is fully manufactured on laser machines and assembled with bolts without any welding

18. Any part of the press can be ordered as a spare part due to ease of disassembly and assembly

19. Total weight of the press is approximately 7.5 tons