-
Machine for roll forming sheet metal into uniform sections such as angles and channels with thickness up to
1.2
mm
-
Machine allows a maximum incoming sheet strip width of up to
30 cm
-
Machine is equipped with a sheet coil holder, initial cutting press, punching press, roll forming unit, and final cutting press
-
Sheet metal is used in coil form with the width suitable for the required section to be formed
-
Roller sets can be/span> supplied with
الMachine according to the required shapes
-
The roll forming unit operates in 10 stages, and roller sets are designed for sections with a maximum of 10 stages
-
The roll forming unit is equipped with a side gear set to adjust and transmit motion between forming stages
-
Production rate of
Machine is 30 meters per minute
-
The roll forming unit is driven by a
5 HP electric motor with a speed reducer at 90 RPM
-
The hydraulic unit is driven by a 5 HP electric motor
-
Machine is equipped with an electrical control panel to operate the roll forming unit and the hydraulic presses
-
Electric sensors are used to adjust the required lengths for cutting and punching
-
External dimensions of
Machine : 750 cm length, 95 cm width, and 155 cm height
-
Total weight of
Machine is approximately 1800 kg
-
The main parts of
Machine are manufactured on
CNC and laser machines
-
Visible parts of
Machine are painted with two coats of the appropriate color before assembly
-
The line is assembled by bolting without using any welding operations in assembly
-
The line is warranted for one year, and defective parts are supplied free of charge during the warranty period
