The automatic scrap baler is used for compressing scrap sheet metal and cans up to a thickness of 2 mm and compressing it into a cubic shape measuring 50 cm and weighing 100 kg.

The baler operates continuously where scrap is placed into the upper hopper continuously and the compressed blocks exit from the other side continuously after each pressing cycle.

General Specifications:

• The baler is manufactured from 20 mm thick steel plates

• The baler operates on a 380 V electric motor

• The hydraulic pump is mounted directly on the electric motor via a flexible coupling

• The baler can be operated manually from the manual control unit and can also operate automatically when the PLC is activated

• The electrical circuit is equipped with limit switches to define the start and end of movement for all moving parts

• The hydraulic circuit is equipped with a pressure relief valve and is fitted with a pressure gauge and an oil filtration filter

• The baler is equipped with an upper hopper that is easy to assemble and disassemble

• The baler is equipped with sharp internal cutters that trim excess parts during the pressing operation