Name: Vehicle clash alarm
Brand: CADsoul

Vehicle clash alarm

Model no. VCA032

Vehicle clash alarm is a system of adjustable distance sensor which triggers two side stop lights.

The clash alarm is fixed inside the vehicle just behind the rear window and its lights is triggered if any other vehicle comes from behind closer than the adjusted distance.

The distance sensor is an opto-electronic distance measuring module for vehicle alarm applications. The module operates on basis of non-contact comparative phase measurement with amplitude modulation. The measured result is available on the data interface. A digital switching output and An analogue 4...20mA output. Analog output signal is directed to ignite two side lights.

The alarm set alignment can be easily achieved through set base with the help of the red pilot laser.

Vehicle clash alarm 1 Vehicle clash alarm 2

Extra Applications:

Control and Positioning of Transport and Crane Systems.
Distance Measurement.
Position Detection.
Level Measurement.
Security Applications.
Position Controls of moving Objects.
Control and Measuring of Lifting Devices.
Lift Positioning.
Parts detection.

Technical Datas

Measuring range:	0.2 to 30 m on any natural surface, up to 150m (depending on target surface)
Measuring accuracy:	2 mm , 3 mm at (+15C to +35C), 5 mm at (-10C to +50C)
Measuring resolution:	0.1 mm
Repeatability:	≤ 0,5 mm
Measuring rate:	10Hz on white surfaces ,Typically 5 Hz (up to 10 Hz) on all surfaces;
Laser divergence:	0.6 mrad
Laser classification:	1 mW under IEC 825-1, laser class 2 (red light)
Switching output:	Programmable switching threshold ,Side-switch" with 0.5 A load capacity.
Analogue output:	programmable distance range limits, 4 mA to 20 mA
Side lights	100 watt each
Supply voltage:	10 V to 30 V
Power consumption	200 W for alarm set
Casing body	Steel sheets 1 mm thickness
Phys. dimensions:	380 x 150 x 85 mm (L x W x H) without base
Weight:	About 2.5 k.g.

Vehicle clash alarm 4

Vehicle clash alarm 5

Vehicle clash alarm 6

more..