Fiber Separator

Model no.  F2S093

The fiber separator is designed to meet the needs of recycling operations and municipalities for fiber-free crumb rubber. This machine is designed to work in conjunction with  secondary fiber separators as fitted to our screen.

Fiber separator in production line

Unique features :

The separator is compact, economic and simple to operate. It is designed to process rubber powder at a rate  of up  to 1500 kg per hour and after initial set-up, not require any operator intervention.

The rubber is moved across a series of trays on the table by means of a pair of vibratory motors attached to the underside of the table. Due to the tray profiles and vibratory action, the fiber is brought to the top of the rubber stream, where it is removed by a number of suction points suspended above the table.

The removed fiber is blown into a cyclone where it is wet down by water sprays around the cyclone inlet.

Fiber suction system

The wet fiber and excess water is discharged from the base of the cyclone into a screen where the fiber is separated from the water  and is discharged into an auger, the auger depositing the fiber into bulkbags for sale or disposal,

Suction system

The cleaned water is returned to a water storage tank for re-use. The air discharged from the cyclone is filtered through a bag filter, to remove any remaining fiber , prior to release in the atmosphere.

The same water storage tank can be used as a source of cooling water for our shredders and grinders, the cyclone serving the dual purpose of separating the fiber from the air stream and cooling the hot water returned from the shredder and grinders .

The clean rubber is discharged from the fiber separator into an auger for screening and bagging.

Drive system

Technical Specification :

Vibrating motor 4 kw 380 v

Production capacity up to 1500 kg/hr

All moving parts are guarded for safety beside emergency push button

Overall dimension 2m lenght , 1.5m width and 1.5m high

Total weight is 800 kg.

Output sample