Name: Hoisting Unit 40 ton
Brand: CADsoul

Hoisting Unit 40 ton

Model No. H2U063

Hoisting unit is a high performance product designed to provide many years of trouble free service. It is driven through a diesel powered hydraulic power pack which generates 270 lit/min oil flow at 3000 PSI pressure. planetary gear set which is driven by two hydraulic motors is used to drive a wire drum of 1000m wire capacity. A hydraulic valve is used to operate the motors at high torque or high speed.

Hoisting Unit 40 ton 2

Hoist outer dimensions

Hoisting Skid Technical specifications:

Skid material	All skid is made from st37 steel sheets of 6mm thickness
Skid construction	Sub frame of 150*150mm tubes and covered with 6mm sheet
sub frame height	156 mm
Skid length	2500 mm
Skid width	3000 mm
Overall height	660 mm
Hoist mounting	Two side holders with fixing points to meet hoist bearings
Power pack fixing	Fixing points in sub frame to meet power pack fixation
Wire laying	Pulley 250 cm apart from drum center to help in wire laying
Skid moving	Skid is prepared with 4 holding anchors to ease unit moving
Skid weight	950 kg

Power Pack Technical specifications:

POWER PACK MODEL	P1P063
DESCRIPTION :	Diesel powered skid mounted hydraulic power pack designed to operate in a safe area.
OPERATION:	Intended to supply hydraulic power to various hydraulic driven systems.
SKID:	Engine, Batteries, Pump,Oil tank and Fuel tank are mounted on robust skid with side doors
ENGINE :	Cummins V8 Turbo, 119 HP Max.
FUEL CONSUMPTION :	0.75 litre/min under full load.
FUEL CAPACITY :	360 litres
HYDRAULIC PUMP:	Hydrocar Gear Pump
HYDRAULIC PRESSURE:	Maximum Working Pressure 3000 PSI
OIL FLOW RATE:	270 litres/min @ 3000 PSI
PRESSURE CONTROL:	Adjustable relief VALVE
PRESSURE INDICATOR:	Standard pressure gauge
RETURN LINE FILTERING:	Standard filter 10 micron
HYDRAULIC OIL TANK:	Baffled tank Of 540 liter capacity
OIL LEVEL:	Oil Tank is provided with transparent level and heat indicator
CONTROL PANEL :	Engine on/off switch, Engine rpm, Hour meter, fuel tank indicator and oil pressure gauge are mounted on moveable control panel in addition to regular indicators.
CONTROL VALVE:	Control panel is provided with 3 valves 4/3 directional control valve 60 GPM 3000 PSI
SAFETY :	All moving parts are guarded, Hydraulic pump is supported with non return valve, Hydraulic circuit is provided with adjustable relieve valve
DIMENSIONS :	2500 (L) x 1250 (D) x 1500 (H)
POWER PACK WEIGHT :	Gross Weight: 1700 kgs.

Hoisting drum Technical specifications:

Hoist model number	P2H063
Running Input Torque	722 Nm each motor
Rated Input Speed	372 rpm
Input Hydraulic Pressure	193 Bar
Input Hydraulic flow rate	186 lpm
Drum Size mm	350B x 1000F x 1750L
Full Drum or Maximum Layers	960 mm
Drum Storage Capacity	1017m @ 35mm wire
Wire Diameter	35mm
Largest Recommended Wire Size	45mm
Drum Clutch "dog-clutch"	Multi-disc Brake Spring applied and hydraulically released
Wraps	50 wraps per layer
Layers	10 layers per drum
Freeboard	0.7 X wire diameter
Mean Drum	655mm
Gear set Type	Multi-stage planetary reduction
Gearing ratio	1:78
Gear Set Efficiency	85%
Free Spooling	No
Extension Shaft	No
Capstan	No
"Bull Gear"	Spur gear
Fleet Angle	1.5 degree
Hoist Weight	1250 kg
Power consumption	88 hp

Unit Performance Estimate
	Low Speed		High Speed
Layer	Line Pull	Line Speed	Line Pull	Line Speed	Rope Capacity
	(kg)	(mpm)	(kg)	(mpm)	(m)

1	40686	6.6	18000	14	60
2	35561	7.6	15240	16	124
3	31344	8.6	13433	18	203
4	27972	9.6	11988	20	290
5	25295	10.8	10840	22.6	388
6	23032	11.8	9879	24.8	494
7	21175	12.8	9075	27	612
8	19607	13.8	8403	29	737
9	18230	14.8	7812	31	874
10	17035	16	7300	33.6	1017